Panasonic A210 - Manual (Page 30)

27
Basic Operations
DTMF
DTMF (Dual Tone Multi Frequency) can be sent during a
conversation. These are often used to access voicemail, paging and
computerised home banking. For example, you may need to enter a
number to remotely access voicemail messages. A phone number
may be stored in the Contacts together with a DTMF sequence,
allowing the number to be dialled upon recall and the DTMF
sequence to be sent automatically.
To send DTMF during a call:
1. Enter digits ([L] - [K], [e] or [r])
Pause dial
Using pauses allows you to send DTMF automatically.
1. Enter the phone number
2. Press and hold [L] until a “P” is displayed
3. Enter the DTMF digits after the pause, e.g. enter the number to
access voicemail messages
4. [T]
When the call is connected, the DTMF sequence will be sent after
3 seconds.
Making a second call
You can make another call while on a call.
During a call:
1. Enter the second phone number or select
a phone number from the Contacts list
To access Contacts list, see “In-call menu” on
page 26.
2. [T]
The first call is put on hold.
3. [6] (Swap) to switch between the two
calls if required