Removing the front panel 3, Attaching the front panel 3, About this unit – Pioneer DEH-2700RB User Manual

Page 3: Protecting your unit from theft, Before you start, Class 1 laser product, Removing the front panel, Attaching the front panel

Advertising
background image

About this unit

The tuner frequencies on this unit are allo-

cated for use in Western Europe, Asia, the

Middle East, Africa and Oceania. Use in other

areas may result in poor reception. The RDS

(radio data system) function operates only in

areas with FM stations broadcasting RDS sig-

nals.

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.

! A CLASS 1 LASER PRODUCT label is affixed

to the bottom of this unit.

CLASS 1
LASER PRODUCT

! The Pioneer CarStereo-Pass is for use only in

Germany.

! Keep this manual handy as a reference for op-

erating procedures and precautions.

! Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

! Protect this unit from moisture.
! If the battery is disconnected or discharged,

the preset memory will be erased and must be
reprogrammed.

! Should this product fail to operate properly,

contact your dealer or nearest authorized Pio-
neer Service Station.

Protecting your unit from

theft

The front panel can be detached from the

head unit and stored in the protective case

provided to discourage theft.

Important

! Never use force or grip the display and the

buttons too tightly when removing or attach-
ing.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press DETACH to release the front

panel.

Press DETACH and the right side of the panel

is released from the head unit.

2 Grab the front panel and remove.

Grab the right side of the front panel and pull

away to the left. The front panel will be de-

tached from the head unit.

3Put the front panel into the protective

case provided for safe keeping.

Attaching the front panel

1 Place the front panel flat against the

head unit.

2 Press the front panel into the face of

the head unit until it is firmly seated.

Before You Start

En

3

English

Section

01

Advertising
This manual is related to the following products: