Paradyne ACCULINK 336x E1 - Manual (Page 15)

Installation
2-3 3360-A2-GB20-20 December 1996
SNMP Connection Examples
The E1 NTU can be connected to an SNMP
management system in a number of ways. Some examples
include:
•
Directly connecting the COM port to the SNMP
manager (
Figure 2-4 ).
•
Connecting the COM port to a network device (e.g.,
a router) for SNMP management (
Figure 2-5 ).
•
Connecting the COM port or the AUX port to an
external LAN Adapter for Ethernet SNMP
connectivity (
Figure 2-6 ).
•
Daisy chaining the COM port of one device to the
AUX port of the other to provide SNMP
connectivity (
Figure 2-7 ).
•
Remotely managing the E1 NTU through the
Facility Data Link (FDL) or the synchronous data
port’s Embedded Data Link (EDL) (
Figure 2-8 ).
NOTE
EDL is only available on 2-port
and 4-port E1 NTUs.
NETWORK
LAN
ROUTER ETHERNET
SNMP
SNMP
PPP/SLIP
496-14738-01
NTU
HDSL
AAC
LTU
Figure 2-4. Direct Connection to an SNMP Manager
NETWORK
LAN
ROUTER ETHERNET
SNMP
SNMP
PPP/SLIP
496-14739-01
NTU
HDSL
AAC
LTU
Figure 2-5. Connection through a Router to SNMP