Plinius Audio TIKI Network Audio Player - Manual (Page 11)

9 NETWORK AUDIO PLAYER
Installation & Operation
WARNING: RISK OF ELECTRIC SHOCK. TERMINALS MARKED WITH
SHOULD BE CONSIDERED HAZARDOUS LIVE AT ALL TIMES.
This network audio player operates at hazardous voltage levels. We recommend
that any work requiring removal of the lid be referred to a suitably qualified and
experienced service technician. DO NOT place this network audio player in any
position where liquids or any foreign material may accidentally enter it.
PLEASE READ & UNDERSTAND THE PRECAUTIONS WITHIN THIS MANUAL
FOR CORRECT PLACEMENT & OPERATION OF THIS PRODUCT.
CONNECTIONS
Connections to your Plinius Tiki Network Audio Player should be made in the same
order as they are listed in this section. DO NOT attempt to connect your Tiki Network
Audio Player until you have read and fully understood these instructions. Although these
instructions refer to the connection of the Plinius Tiki to a preamplifi er, the Tiki can also
be safely installed into multimedia systems by following the same installation guidelines.
Should you require any further assistance, please contact your Plinius dealer.
ETHERNET INPUT
Connect your Network device (Router, Computer etc) to the Ethernet input on the
back the Plinius Tiki using suitable CAT-5 or CAT6 Ethernet cables only. Make sure the
connector is a snug fit and inserted all the way in.
OUTPUT TERMINALS
The connection of the outputs of the Tiki Network Audio Player must be made by an
‘instructed person’ or by suitable ready made interconnect cables only.
Connections for preamplifiers are provided at the rear of the unit. If using single-
ended RCA outputs connect your Tiki to the ‘line level’ RCA inputs on the back of
the preamplifier. Make sure you connect the red coded cable to the red RIGHT RCA
output, and the black (or white) cable to the white LEFT RCA output. Also make sure
the RCA connectors are a snug fit and are inserted all the way in.
TIKI ETHERNET INPUT NETWORK ROUTER NAS MEDIA SERVER