Panasonic AJ-HD3700HP - Manual (Page 11)

- 11 -
2K SET UP menu
This menu is displayed by pressing the following keys:
)
The underlining indicates the default setting.
Key Key designation Description
F1 SAMPLING For selecting the sampling format for DUAL Link SDI_OUT output signals.
This works by pressing the F button at the same time.
4:4:4: Output sampling format of 4:4:4 is selected.
4:2:2: Output sampling format of 4:2:2 is selected.
F2
F3 BIT LENGTH
(This item is displayed only
when “4:4:4” is selected in F1
(SAMPLING).)
For selecting the bit length of the output signal based on 4:4:4.
10bit: 10-bit processing is selected.
12bit: 12-bit processing is selected.
F4
F5 H CROP
(This item is displayed when F3
(VIDEO) in the SYSTEM SET
UP menu is set to “2048 (PsF)”.)
For selecting the Crop format in the monitor output of 2048 mode.
CTR CROP: Side_Crop is selected.
R CROP:
Right_Crop is selected.
L CROP: Left_Crop is selected.
F6
F7 ROUNDING
(This is displayed in the setup
described on the right.)
When selecting an output sampling format of “4:4:4” for F1 (SAMPLING)
and “10bit” for F3 (BIT LENGTH), or selecting an output sampling format
of “4:2:2” for F1 (SAMPLING), decide whether or not to perform Dynamic
Rounding and select one of the following:
OFF: Dynamic Rounding is not performed.
ON: Dynamic Rounding is performed.
F8 EXIT Returns the VTR to the SET UP menu screen.
F9 H. REC. GRD When the system settings in SYSTEM SET UP differ from the input signal in the
H Sample, decide whether or not to record and select one of the following.
OFF: Recording is performed.
(Recording is based on the value set for H Sample in the
system settings.)
ON: Recording is prohibited.
F10 jF12
F13 CONNECT CHECK The LED for the AJ-HDP2000 blinks (for the regular SYSTEM
connection) only when the F13 key is pressed continuously.
When using several AJ-HD3700 B/A/H and AJ-HDP2000 units, this can
be used to check which unit connects to which counterpart.
SET UP F9
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1