Powermatic WP2412 - Manual (Page 6)

6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a Model WP2412 Powermatic Planer. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Description
This multi-featured 15 horsepower planer is built for the rugged, industrial environment. It features a quick
change Tersa
TM
cutterhead with reversible knives, segmented infeed roller with sectional chip breaker,
and dual drive chains and sprockets. The cutterhead and infeed and outfeed rollers have double
bearings. The planer frame is built with heavy plate steel, and the cast iron table is supported by four
massive columns – this machine will not vibrate under load. Knife changes are quick with the self-seating
knives. The planer will accomodate rough to finish work, and multiple piece planing.
Specifications
Model Number ............................................................................................................................. WP2412
Stock number .............................................................................................................................. 1791295
Main motor (TEFC) .......................................................................................15HP, 3Ph, 230V, 60Hz, 60A
Table raising motor (TEFC)........................................................................................................... .0.75HP
Feed Motor (TEFC)............................................................................................................................. 1HP
Variable feed speed (ft/min.) ......................................................................................................... 16 to 72
Cutterhead speed (RPM) .......................................................................................................... 5200 RPM
Cutterhead diameter (in) ..................................................................................................................... 4.75
Knives TERSA
TM (in)................................................................................................................. four @ 25”
Max. chip removal single pass (in) .................................................................................................. 0.3125
Serrated infeed roller (in) .................................................................................................................... 2.75
Outfeed rollers (in) .............................................................................................................................. 2.75
Table dimensions (in)................................................................................................................24.8 x 45.6
Thickness capacity (in) .......................................................................................................................... 12
Dust port (in)............................................................................................................................................ 6
Belts ...................................................................................................................................... three V-belts
Overall dimensions (in LxWxH) ............................................................................................... 58 x 48 x 43
Overall dimensions (crated) (in LxWxH) .................................................................................. 63 x 53 x 49
Net weight (lbs)................................................................................................................................. 2,310
Shipping weight (lbs)......................................................................................................................... 2,640
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WHM Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.