Panasonic Blu-ray DiscTM Home Theater Sound System SC-BTT490 - Manual (Page 16)

16
VQT3X49
∫ When the connecting devices have an HDMI terminal
HDMI standby pass-through
Even if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI1 IN (CABLE/SAT)
or HDMI2 IN terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this
system). Even while the unit is in the standby mode, you can change the input signal HDMI1 IN (CABLE/SAT) or HDMI2 IN by
pressing [EXT-IN] on the remote control.
∫ When the connecting devices do not have an HDMI terminal
Other device connection
AV IN
(ARC)
AV OUT AV OUT
e.g.,
Set Top Box, etc. Video game, etc.
HDMI cable
(not supplied)
HDMI cable
(not supplied)
OPTICAL
OUT
e.g.,
Optical digital audio cable
(not supplied)
Set Top Box, etc.
SC-BTT490P_eng.book 16 ページ ２０１２年２月２２日 水曜日 午前９時１分