Panasonic Blu-ray DiscTM Home Theater Sound System SC-BTT490 - Manual (Page 17)

Getting s
tar
te
d
17 VQT3X49
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (> 19)
≥ You can enjoy BD-Live (> 24)
≥ You can enjoy VIERA Connect (> 30)
≥ You can access other devices (Home Network) (> 31)
≥ This unit supports Wi-Fi Direct TM and can make a
wireless connection to wireless devices without
router. You can use this function when enjoying Home
Network feature, etc. Internet access is not available
while connected via Wi-Fi Direct
TM . ( > 31, 38)
For details about connection method, refer to the instructions supplied with the connected equipment.
This unit can be connected to a wireless router wirelessly.
≥ For up to date compatibility information on your wireless router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to
http://www.panasonic.com/consumer/support (For U.S.A.)
≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes etc.
≥ See page 3 for the precautions of wireless LAN connection.
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
STEP 4: Connecting to an AC power source
Connect only after all other connections are complete.
≥ This unit consumes a small amount of AC power (> 49) even when turned off. In the interest of power
conservation, if you will not be using this unit for an extended period of time, it can be disconnected.
Connection to the network
Wireless LAN connection
LAN cable connection
Wireless router, etc.
Internet
LAN Cable (not supplied)
Internet Broadband router, etc.
VOLT ADJ
110 127V 220 240V
AC power supply cord
(supplied)
To a household AC outlet
(For units with PX printed on the packaging)
Before connecting the AC power supply cord;
Set the voltage at the bottom of the main unit.
≥ Use a flat-head screwdriver to move the voltage selector to the
appropriate position for the area in which this system is used.
≥ If the power plug does not fit your AC
outlet, use the AC plug adaptor
(supplied). If it still doesn't fit, contact an
electrical parts distributor for assistance.
SC-BTT490P_eng.book 17 ページ ２０１２年２月２２日 水曜日 午前９時１分