Panasonic Blu-ray DiscTM Home Theater Sound System SC-BTT490 - Manual (Page 18)

18
VQT3X49
STEP 5: Settings
After connecting your new home theater for the
first time and pressing [
Í], a screen for the basic
settings will appear.
Preparation
Turn on the television and select the
appropriate video input on the television.
1
Press [ Í].
Setup screen appears.
2
Follow the on-screen instructions and
apply the settings.
≥ You can perform this setup anytime by selecting “Easy
Setting” in the Setup menu. ( > 39)
≥ If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as “On-screen
Language” is acquired by this unit.
After completing “Easy Setting”, you can perform
“Easy Network Setting”.
Select “Wired” and press [OK].
Follow the on-screen instructions to apply your
connection settings.
Preparation
≥ Obtain your network name (> 19, SSID).
≥ If your wireless connection is encrypted,
please be sure that you know your
encryption key (password).
1
Select “Wireless” and press [OK].
2
Select “Search for wireless network” or
“WPS (PUSH button method)” and press
[OK], then follow the on-screen
instructions and apply the settings.
∫ “WPS (PUSH button method)”
If you are using a wireless router that supports
WPS (Wi-Fi Protected Setup
TM ), you can easily
perform the settings.
∫ “Search for wireless network”
The available wireless networks will be displayed.
1 Select your network name and press [OK].
≥ If your network name is not displayed,
search again by pressing the [R] button on
the remote control. Stealth SSID will not be
displayed, in this case enter manually.
When your wireless network is encrypted
2 Press [OK] to select “Encryption Key”.
Easy Setting
Easy Network Setting
Wired connection
Easy Network Setting
Wired
Wireless
Select a connection mode.
Current setting : Wired
OK
RETURN
Wireless connection
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button method)
Search again
Wireless Settings
Reception
Select a wireless network for connection.
Network name (SSID)
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
R G B Y
OK
RETURN OPTION
Wireless Settings
Enter the encryption key (password) of the wireless network.
Encryption Key
Set
SC-BTT490P_eng.book 18 ページ ２０１２年２月２２日 水曜日 午前９時１分