Panasonic Blu-ray DiscTM Home Theater Sound System SC-BTT490 - Manual (Page 23)

Getting s
tar
te
d
Playback
23 VQT3X49
Playback
Playback
1
Insert the media.
Playback starts depending on the media.
2
Select the item to play and press [OK].
Repeat this procedure if necessary.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [ ∫STOP] when you have finished playback
to protect the unit’s motor, your television screen and so on.
≥ MKV: Successive play is not possible.
≥ It is not possible to play back AVCHD and MPEG2 video
which have been dragged and dropped, copied and pasted
to the media.
Following functions may not work depending on
the media and contents.
Press [ ∫STOP].
The stopped position is memorized.
Resume play function
Press [
1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or
you press [ ∫STOP] several times to display
“STOP” on the unit’s display.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
Press [ ;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart play.
Search
While playing, press [SEARCH
6] or
[SEARCH 5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH
6] or
[SEARCH 5].
≥ BD-Video and AVCHD: [SEARCH5] only.
The speed increases up to 5 steps.
≥ Press [1PLAY] to revert to normal playback speed.
While playing or paused, press [ :] or [9].
Skip to the title, chapter or track.
While paused, press [ 2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward
or backward.
≥ Press [1PLAY] to revert to normal playback
speed.
≥ BD-Video and AVCHD: [1] (;1) only.
Press and hold [ jAUDIO] to activate the audio
setting mode.
You can change the audio channel number or
soundtrack language, etc.
Operations during playback
Stop
Pause
Search/Slow-motion
Skip
Frame-by-frame
Changing audio
SC-BTT490P_eng.book 23 ページ ２０１２年２月２２日 水曜日 午前９時１分