Pioneer PREMIER PRS-D2200T - Manual (Page 6)

5
Setting the Unit
Power Indicator
The power indicator
lights when the power
is switched on.
Top Cover
Before setting up the unit, unfasten the
screws with a 4 mm hexagonal wrench
and remove the top cover.
Bass Boost Control
You can select a bass boost level from
0, 6, 9 and 12 dB.
For instruction of connecting the bass
boost remote control to the amplifier,
see the “Connection Diagram” section.
BFC (Beat Frequency
Control) Switch
BFC switch is on the bot-
tom of the unit. If you hear
a beat while listening to an
AM broadcast with your car
stereo, change the BFC
switch using a small stan-
dard tip screwdriver.
• To adjust the switch, use standard tip screwdriver if needed.