Battery installation for remote control – Polaroid PDM-1035 User Manual
Page 16
16
Installation Steps
Follow the steps below to install the battery.
Step1:
Pull the battery holder out from the remote
control in the direction of the arrow.
Step 2:
Load a new battery properly with
the (+) sided up.
Step3:
Insert the battery holder back into
the original position.
Battery Property
Battery Type:
CR2025 3V
Battery Life:
Approximately 1 year under normal use (at room temperature).
Caution
1. Improper use of the battery may cause overheating, and explosion or ignition,
which can result in an injury or a fire. Battery leakage may damage the remote
control.
2.
Do not expose the remote control unit to direct sunlight.
3.
Do not recharge, disassemble, deform or heat the battery.
4.
Do not put the battery in fire or water.
5.
Immediately replace the exhausted battery.
Battery Installation for
Remote Control