Start reco, Operations, Recording – Panasonic NV-VP31 User Manual

Page 17: 1] press [ 1 ](play), 2] press [ ; / d ], then press [rec, 3] start play on the other equipment, 4] press [ ; / d ] to start recording, 2] press [tape refresh] for 5 seconds or more, 3] press [tape refresh] for 2 seconds or more, One-touch recording (otr)

Advertising
background image

VHS

Operations

17

Recording

You can start recording quickly and set a duration.

..............................................................................................................................................................................................................................................................................................................................

During recording, press [

¥REC/OTR] on the unit repeatedly.

Select the desired recording duration.

≥Each time you press the button, the indication on the unit’s display changes as follows:

Counter display (normal recording mode)

>OFF 30 (min.)>OFF 60 (min.)>OFF 90 (min.)>

OFF 120 (min.)

>OFF 180 (min.)>OFF 240 (min.)>Current time (normal recording mode)

≥The unit will automatically switch off when OTR is completed.

¬ To stop OTR at any time
Press [

] or [Í/I] (VHSÍ).

Notes:
≥The OTR function works during normal recording only.
≥When the tape reaches its end during OTR, the unit will turn itself off.

You can record from other video sources (VHS, camera, etc.).
≥Connect the other equipment to this unit as shown. If audio output on the other equipment is

monaural, use a stereo-monaural conversion cable (not supplied).

≥Insert a recorded cassette tape with an intact erasure prevention tab.
≥Set A1 or A2 with [INPUT SELECT] to select the audio/video source required.

..............................................................................................................................................................................................................................................................................................................................

[1] Press [

1](PLAY).

Find the recording start point.

..............................................................................................................................................................................................................................................................................................................................

[2] Press [

;/D], then press [REC¥].

Put the unit in the recording standby mode.

..............................................................................................................................................................................................................................................................................................................................

[3] Start play on the other equipment.

..............................................................................................................................................................................................................................................................................................................................

[4] Press

[;/D] to start recording.

¬ To stop recording
Press [

].

You can delete all contents in a cassette’s (the picture, the sound and the Jet Navigator data).

..............................................................................................................................................................................................................................................................................................................................

[1] Insert a cassette that you want to delete the cassette’s

contents.

..............................................................................................................................................................................................................................................................................................................................

[2] Press [TAPE REFRESH] for 5 seconds or more.

The unit puts on tape refresh standby.

..............................................................................................................................................................................................................................................................................................................................

[3] Press [TAPE REFRESH] for 2 seconds or more.

The tape refresh function starts.

≥The tape is rewound to the beginning, and it is fast-forwarded with erasing the tape.
≥When the tape reaches the end, this unit automatically rewinds it to the beginning.

Note:
≥When a video cassette with a broken erasure prevention tab is inserted, this function is not

activated.

One-Touch Recording (OTR)

REC/OTR

REW

FF

PULL-OPEN

/

I

EJECT

TIMER REC

TAPE REFRESH

AV2 IN

REC/OTR

CH

VIDEO

AUDIO

L

R

Recording from an external source

AUDIO

OUT

L

R

VIDEO

OUT

PULL-OPEN

TIMER REC

TAPE REFRESH

AV2 IN

REC/OTR

CH

VIDEO

AUDIO

L

R

R-AUDIO-L

VIDEO

R-AUDIO-L

VIDEO

VHS/DVD

OUT

AV1 IN

AV2 IN (AUDIO/VIDEO)

AV1 IN (AUDIO/VIDEO)

Other VHS or Video

movie camera
(Not supplied)

Tape Refresh Function

ª For recordings while “JET NAVIGATOR” is set to “ON”

Be sure to set “JET NAVIGATOR” to “ON” (OPTION

lpage 24).

ª For recordings while “JET NAVIGATOR” is set to “OFF” or

recordings on another VHS
Be sure to set “JET NAVIGATOR” to “OFF” (OPTION

lpage 24).

PULL-OPEN

TIMER REC

TAPE REFRESH

AV2 IN

REC/OTR

CH

VIDEO

AUDIO

L

R

TAPE REFRESH




T A P E R E F R E S H

S T A R T : T A P E R E F R E S H
E N D : S T O P

VP31GL.book 17 ページ 2 0 0 3 年 7 月 3 0 日   水曜日   午後 8 時 2 2 分

Advertising