Pharos Science & Applications 535 - Manual (Page 42)

40
Configuring hardware keys
FSC KeyLock: Preventing switch-on with application buttons
By default, your Pharos Traveler GPS 535 starts up if the Suspend button and an application button
are pressed.
Using the FSC KeyLock program you can specify that the Pharos Traveler GPS 535 only starts if the
Suspend button is pressed.
You can find the FSC KeyLock program under Start – Settings – Personal – Keys - FSC KeyLock.
You will find further information in the help file on your Pharos Traveler GPS 535 and in the user
manual on the Microsoft Getting Started CD.
Assigning chosen functions to the hardware buttons
The buttons of your Pharos Traveler GPS 535 are assigned certain functions such as running
programs. However, you can change these default settings and assign the buttons the functions of
your choice.
►
Tap Start.
► Select the Settings entry in the menu.
► Touch the Buttons symbol on the Personal tab.
A list of the hardware buttons and the assigned programs or functions appears. The four application
buttons appear in the list twice. This is because you can assign different applications to these
buttons for short and for long keystrokes.
►
Select the button in the list for which you want to change the assignment.
► Select the program you want to assign to this button from the list below it.
► Touch OK (navigation bar) to confirm your setting.
The button is now assigned the desired program.
If you want to change the function of several buttons, we advise you to make a note of the new
functions.