PSB Speakers CW260 User Manual

Page 2

Advertising
background image

Highly diffuse radiation for best surround effect

Switchable between Bipole and Dipole radiation patterns

Three Driver, 2-way system with special wide range fl at
power response 2” units and 6 1⁄2” fi berglass textured
polypropylene woofer

Performance Enclosure and new construction bracket
available

Bipole/Dipole and Treble level switches allow for
response adjustments

Frequency Range (-6dB):

50-21,000Hz

Recommended Power:

20-100 Watts

Impedance (Nominal): 8 Ohms (3.5 Ohm min. in Dipole)
Sensitivity (2.83V @1m)

87dB SPL

Drivers:

6-1/2” Woofer

dual 2” wide range units

Overall Dimensions (W x H x D):

9-1/2 x 15-3/8 x 3-1/2”

Cut-out Dimensions (W x H):

8-1/2 x 14-3/8”

CW260 - 6.5” Surround Speaker System

w w w. p s b s p e a k e r s . c o m

1 8 8 8 7 7 2 0 0 0 0

• Bipole surround systems work well when

mounted high on the wall.

• For best Dipole response the system should

be placed near ear level on side walls,

perpendicular to prime listening areas.

• If the system is placed with its long

dimension horizontal (or in some ceiling

applications) the dual array should be

unscrewed and repositioned by 90 degrees.

• Make small exploratory hole and check for

obstructions in wall cavity before cutting

mounting hole.

• Mounting template provided.

• Lightly fi ll wall cavity with fi berglass 2 feet

above and below system. Use standard 4”

fi berglass split to half thickness. Use 1” thick

fi berglass behind system.

• Adjust electric screwdrivers to appropriate

torque. Tighten mounting screws fi rmly but

do not over tighten!

• Set Dipole/Bipole switch to appropriate

position

• Set Treble switch to positive (+) position if

listening position is distant from speakers.

Set Treble switch to negative (-) position if

listening position is close to speakers.

• See manual for more installation hints.

Installation Notes

PSB Speakers reserves the right to change specifications or features without notice.

© 2006 PSB Speakers, a division of Lenbrook Industries Limited.

PSB is a registered trademark of Lenbrook Industries Limited. Printed in Canada 08/06. All rights reserved.

No part of this publication may be reproduced, stored or transmitted in any form whatsoever without the written permission of PSB Speakers

873 CW260 data.

To Reach US Customer Service dial 1 888 772 0000 ext 4445 or 4342

14-3/8"

364mm

15-3/8"

389mm

3-1/2"

89mm

9-1/2"

241mm

8-1/2"

216mm

CW260_data.indd 2

8/11/06 9:26:02 AM

Advertising