Panasonic WV-BM500 - Manual (Page 9)

-7-
5. Height (4)
This recessed screwdriver control should be
adjusted simultaneously to give proper vertical
height consistent with good vertical linearity.
Adjustment should be made to extend the picture
limits approximately 1/10” beyond the top and bot-
tom edges of the mask at over scanning operation.
6. Vertical Linearity (6)
This recessed screwdriver control should be
adjusted to give proper vertical linearity.
7. Focus (8)
The clearest picture is produced when this screw-
driver control is adjusted.
8. DC Restoration (10)
DC restoration circuit provides a stable reference
for the black level. Set the switch to ON position to
prevent excessive contrast and preserve shadow
detail.
INSTALLATION
CAUTION:
The following installation should be made by qualified
service personnel or system installers.
Mounting into EIA Standard 19” Rack
Model WV-BM503 can be mounted into EIA 19” rack as
shown below.
WV-BM503
Rack Panel (17)
Rack Mount Chassis (21)
Rack Mount Screws
(Not Supplied)
Fiber Washer
(Part No. YWL1201ER01)
Fixing Screws (18)
(Part No. YWL831-EM01A)
EIA
Rack