Panasonic KX-TCA155 - Manual (Page 11)

Before Operating the PS
11
PBX Feature Menu
Functions of the PS can be activated through the display key list.
Move the joystick left to display the key list.
Flexible Key Display
A flexible key can be used either to seize a line in order to make or receive an outside call
(F-CO key), or used as a function key. Move the Joystick right to display the flexible key list.
The icon shown beside each F-CO key indicates line status similarly to the LED indicators
on a Proprietary Telephone;
is the same as a green LED; is the same as a red LED.
Pause:
Inserts a dialling pause.
FWD/DND:
Sets Call Forwarding or Do Not Disturb.
Message:
Used to leave a message waiting indication or
call back the party who left you a message
waiting indication.
Search Wave:
Searches the strongest radio signal coming
from the Cell Station.
PBX Program:
Enters the PBX programming mode.
• * The meanings of these icons vary depending on the status of the CO line.
• For further information, refer to “LED Indication” in the KX-TDA series Business
Telephone System Feature Guide.
• To select a key, press its key number, or move the Joystick to select the
desired key then press .
• To assign a function to a flexible key, see page 40.
Pause
3 1 2
0
1
2
3
0
1:Single Line
2:Trunk Group
3:Loop Line
Example:
Understanding the icons for the F-CO key*
(on): You are currently using this line.
(flashing rapidly): You have an incoming call on this line.
(flashing slowly): You have a call on hold on this line.
(on): This line is in use by someone else.
(flashing rapidly): There is an incoming call received by an
incoming call distribution group to which
“Ring” is set as the group call distribution
method.
(flashing slowly): Someone has a call on hold on this line.
(no icon): This line is idle.
key number