Panasonic DVD-LX110 - Manual (Page 26)

26
RQT
8
231
26
Using On-Screen Menus
Main menus
Other Settings
Play Menu (Only when the elapsed play time can be displayed,
[JPEG] [SD[PICTURE] : The Repeat and Marker functions can be used.)
 Press [] to select the menu.
 Press [] to go to the next menu and [] to set.
Repeat step  if necessary.
p Items shown differ depending on the type of software.
p Press [] to go to the previous menu.
p There are items which you can select using the numbered buttons
and [ENTER] on the remote control.
p If the setting does not change, press [ENTER].
p To exit the screen: Press [RETURN].
Program, Group, Title
Chapter, Track, Playlist
Content To start from a specific item
p Press [] to select and press [ENTER].
p Press and hold [] to alter faster.
Time
To skip incrementally or decrementally (Time Slip for play only) (Except KR/KRW)
1. Press [ENTER] twice to show Time Slip indicator.
2. Press [
] to select the time and press [ENTER].
pPress and hold [] to alter faster.
To start from a specific time (Time Search) (Except KR/KRW)
e.g. Playback from 1 hour 46 minutes and 50 seconds (Enter using the remote control) :
[1]
➜ [4] ➜ [6] ➜ [5] ➜ [0] ➜ [ENTER]
To change remaining/elapsed time display
Video To display pixel number
Audio
( ➜ page 18, Changing soundtracks)
To display the current bitrate or sampling frequency
Still Picture To switch still picture
Thumbnail To show thumbnail images
Subtitle ( ➜ page 19, Changing subtitles)
Marker (VR) To recall a marker recorded on DVD recorders
Angle ( ➜ page 19, Angle select)
Rotate Picture ( ➜ page 19, Still picture rotation)
Slideshow
To turn on/off slideshow
To change the slideshow timing (“1 Fast” to “5 Slow”)
p When using Slideshow, Skip/Rotate picture may not work correctly depending on the play position.
Other Settings ( ➜ See below)
Play Speed ( ➜ page 17, Changing play speed)
Repeat ( ➜ page 16, Repeat play)
A-B Repeat ( ➜ page 16)
Marker
Except
[DVD-VR]
To mark up to 5 positions to play again
[ENTER] (The unit is now ready to accept markers.)
To mark a position:
[ENTER] (at the desired point)
To mark another position: [  ] to select “_” ➜ [ENTER]
To recall a marker: [  ] ➜ [ENTER]
To erase a marker: [  ] ➜ [CANCEL] (Remote control)
p This feature doesn’t work during program and random play.
p Markers you add clear when you open the disc lid, remove the card,
press [AV SELECT] or switch the unit to standby.
Advanced Disc Review ( ➜ page 17)
DISPLAY
1
Press once.
ENTER
2
Us
ing On-
Sc
re
e
n
M
e
nus