Panasonic AW-DU600P - Manual (Page 17)

17
START
1
M1
2
M2
0
DEL
CAM
5
M5
TELE
3
M3
FAR
7 8
WIDE
9
NEAR
4
M4
MENU
CLEAR
STOP
MENU
RECALL
6
BAR
Menu settings
O Press the key ( i ) and the first
menu item will appear on the LCD.
O Press the key ( i ) while a menu
item is displayed on the LCD and the display will move to
the next item.
O Press the key ( i ) again and the
last menu item will appear on the LCD.
O Press the key ( i ) while a menu
item is displayed on the LCD and the display will move to
the previous item.
O Use the ! # keys to select the
setting for each menu item.
STOP START
STOP
2
MENUj
START 2 MENU+
START 2 MENU+
START
2
MENU+
$ How to perform menu settings
$ Menu items
Menu-1 Function
(Initial setting: Tx)
Dial up adapter mode settings
Telephone line settings
This is when the telephone line to be used is a tone line. Tone
Pulse
External line transmission number settings
None
0 and
9 and
This is when the telephone line to be used is a pulse line.
This is for when an external line transmission number is not required.
This is for when 0 is to be transmitted via a PBX.
This is for when 9 is to be transmitted via a PBX.
This is for when this adapter is to be used as the transmitting system. Tx
Rx
Direct
This is for when this adapter is to be used as the receiving system.
This is for when this adapter is to be used in direct mode (i.e. when a
telephone line is not to be used).
Menu-2 Modulate
(Initial setting: Tone)
Menu-3 PBX
(Initial setting: None)
The following items are only displayed when this adapter is in Tx mode.
Yes
No
Power control setting for the pan-tilt head system when the telephone line is cut
The power of the pan-tilt head system turns off when the line is cut.
The power of the pan-tilt head system does not turn off when the line is cut.
Menu-7 Pw-off
(Initial setting: Yes)