Premier Mounts PWM-503 - Manual (Page 7)

- 7 -
floor floor
16"
Step 3
Select the area where the plasma will be installed and make sure it can support the weight standards (see warning on page 3). Locate the 16" wood stud centers behind the wall using
a (commercially available) stud finder and mark the center of the studs when found. Set the mounting bracket to the wall and mark the desired height by marking the center of the
tilt back plate.
See fig 3
Wall structure
Wood studs behind
the wall structure
Stud centers
marking
Tilt back plate
Adjusting the
mount
Desired height
marking
Installing the mounts
CENTER
OF
VIEWING
HEIGHT