Polaris 900 RMK - Manual (Page 88)

85
MAINTENANCE
General Maintenance
Coolant High Temperature Indicator Light
The high temperature indicator light is controlled by a switch in the
ECU. If the engine coolant reaches a certain temperature, the switch
completes a circuit that turns the light on. If you must drive your
machine after the high temperature indicator light has come on, drive
slowly and stop frequently to allow the engine to cool down. See your
dealer.
n Coolant Level
The engine coolant level is controlled by the recovery system. The
recovery system components are:
S
Coolant bottle or overflow tank
S
Engine filler neck
S
Pressure cap
S
Connecting hoses
Always maintain the coolant level between the minimum and
maximum marks on the coolant bottle (when engine is cold) to prevent
overheating and serious engine damage.
CAUTION
Operating the snowmobile with insufficient coolant will result in
overheating and serious engine damage. Always maintain the
coolant level as recommended.
Flushing the Cooling System
To ensure that the coolant maintains its ability to protect the engine,
the system should be completely drained every two years and a fresh
mixture of antifreeze and distilled water should be added. This service
must be done when the engine is cold. Ask your Polaris dealer to
check the coolant when he performs the fall tune-up on your
snowmobile.