Panasonic CN-GP50N - Manual (Page 6)

- 6 - Using the Navigation System for the First Time
2 Using the Navigation System for the First
Time
The navigation system is ready for use after it has been connected to
the power supply.
1. Turn the device on.
The L
ANGUAGE
window opens.
2. Tap on the language you would like to use.
The map opens in Standard mode. It shows the Arc de Triomphe in
Paris. Your current position will be displayed as soon as GPS reception
is sufficient to determine it.
3 Operating the Navigation System
3.1 Volume
The volume of the spoken driving instructions can be adjusted during
navigation.
While the map is open:
1. Tap the (Volume) button.
The volume bar opens. It contains three buttons for adjusting the
volume.
(Louder), (Quieter), (Volume on/off).
2. Tap the (Volume) button again.
The volume bar closes.
The volume bar closes automatically when you don't operate it for
some seconds.
3.2 Opening the Map
The map may be opened from almost any window.
►
Tap the (Show Map) button.
The map opens in Standard mode. It displays your current location. If
GPS reception is not sufficient to determine the current location it
displays the last known location.