Polaroid CZA-05300B - Manual (Page 46)

EN-45
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
„
Select the image that you want to print with
the e / f buttons.
„ Select the [Num of Prints] (up to 99) with the c
/ d buttons.
„ After selecting the desired image and printing
number, press the OK button to confirm.
4. Select [Exit] with the c / d buttons, and press
the OK button.
5. Select [Print] with the c / d buttons, and press
the OK button to start printing.
6. The printing starts and the figure shown on the
right hand side appears.
„
[COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
„ If an error is detected during the connection (i.e.
the printer hardware problem) between camera
and printer, [PRINT ERROR] will be displayed.
„ If an error is detected during the communication
(i.e. wrong setting on the camera) between camera and printer, [ERROR] will be
displayed.
„ The image printing may fail if the power to the camera is cut off.
„ For service, support and warranty information visit www.polaroid.com.
„ "Polaroid" and “Polaroid and Pixel” are trademarks of Polaroid Corporation, USA.
100-0001
Num of Prints
00
OK:Enter
OK:Enter
PRINTING