Polycom DVD 729 - Manual (Page 8)

8
3139 246 12911
Preparation
Basic Connections
● Please refer to the instruction manuals of your
TV, VCR, Stereo System or other devices as
necessary to make the best connections.
● Make one of the following connections,
depending on the capabilities of your existing
equipment.
The following guidelines are options for the best
picture and sound quality available on your DVD
Player.
Picture
1 Use the CVBS Video Ouput for good picture
quality.
2 Use SCART Output for best picture quality.
Sound
1 Digital audio connections provide the clearest
sound. Connect the DVD Player’s DIGITAL
AUDIO OUT (COAXIAL or OPTICAL) to your
amplifier or receiver.
2 If digital connections are not possible, connect
the DVD Player’s Left and Right (white and red)
AUDIO OUT to your amplifier, receiver, stereo
or TV.
Warning!
–
Never make or change connections with
the power switched on.
– Connect the DVD Player directly to your
TV, instead of eg. a VCR, to avoid
distortion because DVD video discs are
copy protected.
– Do not connect the DVD Player AUDIO
OUT to PHONO IN of your amplifier or
receiver.
Connecting to a TV
1 Connect the SCART (TV OUT) on the DVD
Player to the corresponding connector (TV IN)
on your TV.
Note:
– Ensure that the “TV” indication on SCART
cable is connected to the TV set and “DVD”
indication on SCART cable is connected to the
DVD player.
If your TV is not equipped with a SCART input,
you can select the following connection:
If your TV has a CVBS Video input
connector,
1 Connect the CVBS VIDEO OUT on the DVD
Player to the CVBS VIDEO IN.
2 Connect the Left and Right AUDIO OUT on the
DVD Player to the Left and Right AUDIO IN on
the TV.
COAXIAL
OPTICAL L
R
VIDEO TV OUT
CVBS VIDEO IN
RIGHT
AUDIO IN
Back
of TV
LEFT
AUDIO IN
TV IN SCART
TO TV
AUDIO IN TO TV
VIDEO IN TO TV
SCART IN
OR
01-28 DVD728 Eng 18/03/2003, 5:41 PM 8