Philips CD 240 EN - Manual (Page 38)

36 Frequently asked questions
9 Frequently asked
questions
In this chapter, you will find the most
frequently asked questions and answers
about your phone.
Connection
The handset does not switch on!
• Charge the batteries: Put the handset on
the base station to charge. After a few
moments, the phone will switch on.
The handset does not charge!
• Check charger connections.
icon is not blinking during
charge!
• Battery is full: There is no need to
charge the battery.
• Bad battery contact: Adjust the
handset slightly.
• Dirty contact: Clean the batteries
contact with a cloth moistened with
alcohol.
Communication is lost during a call!
• Charge the battery
• Move closer to the base station.
The phone is "Out of range"!
• Move closer to the base station.
Set-up
SEARCHING... is displayed on handset
and icon is blinking!
• Move closer to the base station.
• Make sure that your base station is on.
• Reset your unit and restart handset
registration.
INITIAL is displayed on handset
during charge!
• Charge the batteries for a few more
minutes to start up normally
Sound
Handset does not ring!
Check that the
RING VOLUME is not set
to RINGER OFF , and make sure icon is
not displayed on the screen (see “Set the
Ring Volume” on page 27).
Caller does not hear me!
Microphone may be muted: During a call,
press
p
.
There’s no dialling tone!
• No power: Check the connections.
• Batteries are empty: Charge the
batteries.
• Move closer to the base station.
• Wrong line cable used: Use the line
cable provided.
CD240_IFU_EN_UK_version.book Page 36 Thursday, February 1, 2007 4:07 PM