Pioneer Driver Software For USB D/A Converter Functionality N-50 - Manual (Page 5)

5
7 Click on the [Audio] tab, then confirm that [Pioneer USB Audio Device] is
listed as the [Default device] for [Sound playback].
t If another device has been selected, open the drop-down menu and select [Pioneer USB
Audio Device], then click on [Apply] to change the selection.
8 To enable the new setting, reboot your computer.
9 Confirm that your media player’s sound volume is set to Maximum.
In the event your media player requires an output plugin setting, confirm that [Pioneer USB
Audio Device] is selected.
2. To disable the operating system’s sound scheme
Under default OS settings, computer events may be accompanied by audio signals and beeps
that are audible through the speakers attached to the N-50. In the event you do not wish to hear
such non-music signals, follow the instructions listed below:
1 Click [Start] t [Control Panel] t [Sounds and Audio Devices].
2 Click on the [Sounds] tab, and for the [Sound scheme], select [No Sounds],
then click on [Apply].
Procedure finished.
Procedure finished.