Panasonic TC-26LE60 - Manual (Page 15)

15
Advanced
How to Use Menu Functions
(picture, sound quality
, etc.)
Adjustments/Configurations (alternatives)
Resets all picture adjustments to factory default settings except for “Other adjust” Normal Set
Basic picture mode (Vivid/Standard/Cinema) (p. 41) Pic. mode Standard
Adjusts luminance of the back light. Back light +20
Adjusts color, brightness, etc. for each picture mode to suit your
taste
Picture +20
Brightness 0
Tint 0
Sharpness 0
Color 0
Selects level of warm colors (red) and cool colors (blue) (Warm/Cool/Normal) Color temp Cool
Controls dark areas without affecting the black level or brightness in the overall picture (On/Off) AI picture On
Adjusts vertical alignment and size when aspect setting is “ZOOM” (p. 40) On Zoom adjust
Reduces noise, commonly called snow. Leave off when receiving a strong signal. (On/Off) Video NR Off
Minimizes noise and cross-color in the picture. (On/Off)
Not valid on component and HDMI.
3D Y/C filter Off
Selects image resolution of component-connected devices (SD/HD)
SD: normal vision HD: high-definition vision
Only 480 p signal accepted; regular TV (NTSC) is not available.
Color matrix SD
Select Dark or Light depending on the picture conditions. (Dark/Light)
The dark scene becomes easy to see. (Valid only for external input signals.)
Black level Light
Reset Bass, Treble and Balance adjustments to factory default settings. Normal Set
Increase or decrease the bass response. Bass + 4
Increase or decrease the treble response. Treble 0
Emphasize the left / right speaker volume. Balance 0
Equalize overall volume levels across all channels and VIDEO inputs. (On/Off) AI sound On
Enhances audio response when listening to stereo. (On/Off) Surround Off
Selects according to the signal when HDMI is connected (Auto/Digital/Analog)
Auto: Automatically selects Analog / Digital signal
HDMI in Auto
Minimizes volume disparity after switching to external inputs Audio leveler 0
Automatically turns off the TV after a pre-selected amount of time. 0/30/60/90 (minutes)
Timer setting is also possible by pressing the “Sleep” button on the remote control. (p. 10)
Sleep 60
Locks the channels and programs (p. 16-17)
Selects channels to be displayed when pressing “Channel up/down” buttons. (Fav./All)
Fav.: Only channels registered as Favorite (p. 19)
CH scan All
Selects the screen menu language (p. 9) Language
Sets receiving channels. (p. 18-19) Program channel
Displays labels of external equipment (p. 13) Input labels
Displays subtitles (Closed Caption) (p. 13) CC
Sets how to power on the TV. (Set/Off)
Set : Connect power cord plug to Cable box etc. and control TV’s On/Off on the connected
equipment. (The Sleep Timer will not function if Auto power on is set.)
Off : Supply Power from wall outlet and control TV’s On/Off on TV side.
(“First time setup” menu is displayed when power cord plug is re-inserted after removing it
from the wall outlet.)
Auto power on Off
To prevent howling and image oscillation, stops output of the pictures and audio specified in this
menu. (p. 23) (Off/Comp./HDMI/Video 1/Video 2/Video 3)
Comp./HDMI cannot output video signals regardless of “Prog-out stop” setting.
Prog-out stop Off
Controls equipment connected to HDMI terminals. (p. 21, 22) (On/Off) Ctrl with HDMI On
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room
(Standard/Saving)
Power save Standard
Displays TV version and software license. About
Performing Reset will clear all items set with Setup, such as channel settings. (p. 18) Use Reset with care. On Reset
•
In VIDEO mode, the Audio menu and Setup menu give a smaller number of options.