Panasonic BB-HCM331 - Manual (Page 42)

Installation/Troubleshooting
42
Wall Mount
Notes
•
Drive mounting screws into the wall. Be careful to avoid touching any
metalwork (metal/wire laths etc.), conduits or electrical cables buried in
the wall.
• Do not mount the camera upside down. The image may be displayed
upside down.
• When mounting, we suggest using the hardware we provide. Mounting
in any other manner may cause the camera to fall, causing personal
injury or damage to the camera.
• To reduce the load on the mounting hardware, dress the cables neatly
and secure with tape.
More than
165 mm
Self bonding tape
Waterproof the rest of
the cable. (See page 39)
Screw
Mount the flexible stand firmly to the
wall with the three screws (accessories). Attach the camera screwing the
threaded mount into the stand/tripod
mounting hole.
Adjust the camera position
and secure the flexible stand firmly. Roll up the cables and flexible stand with
the self bonding tape (accessories).
Indicator
Do not mount the camera on a soft
material. The camera may fall and
break down.
Use appropriate screws suited for
the material of the wall.
Caulk around
flexible stand
if necessary.
Stand/Tripod
Mounting Hole