Panasonic AJ-HDC27V - Manual (Page 89)

89
CAMERA SW MODE screen
The modes of the camera switches are set on this
screen.
Item
Variable
range
Remarks
FILTER INH ON
OFF
VF
display
USER
ENG For selecting whether or
not the data in the AWB
memories (channel A,
channel B) is to be held
for each filter.
ON:
Only the channel A and
channel B memories (2
memories) regardless of
the filter.
OFF:
The data is held for each
of the filters (4
a 2 = 8
memories).
SHOCKLESS
AWB OFF
NORMAL
SLOW
FAST USER
ENG For selecting the
SHOCKLESS AWB
setting.
“SHOCKLESS AWB”
means that the switching
of the WHITE BAL switch
to A, B or PRST is not
accompanied by a shock.
FAST (high-speed:
approx. 0.5 sec.),
NORMAL (normal speed:
approx. 1 sec.) or SLOW
(slow: approx. 3 sec.) can
be set for this effect.
COLOR BARS SMPTE
FULL BARS USER
ENG For selecting the color bar
signals.
SMPTE:
SMPTE color bars
FULL BARS:
Full color bars
S. GAIN OFF S.GAIN
L/M/H USER
ENG For selecting the method
for releasing the super
gain mode.
S.GAIN:
The mode is released by
the super gain switch
only.
L/M/H:
The mode is released by
changing the L/M/H
switch setting.
USER1 SW INH
S.GAIN
S.IRIS
S.BLK
S.STR
AUDIO CH1
AUDIO CH2 USER
ENG For allocating the
functions in USER1 SW.
USER2 SW INH
S.GAIN
S.IRIS
S.BLK
S.STR
AUDIO CH1
AUDIO CH2 USER
ENG For allocating the
functions in USER2 SW.
The underlining in the variable range column indicates the setting in the preset mode.
Setting menu screens
(CAM MAIN MENU 2)
Item
Variable
range
Remarks
S. BLK LVL OFF
–10
–20
–30
VF
display
USER
ENG For setting the super black
level.
ECU DATA
SAVE ON
OFF USER
ENG ON : The data controlled
by the ECU is stored
in the memory.
OFF : The data is not
stored in the
memory.
SUPER GAIN screen
The gain allocated to the SUPER GAIN switch is set
on this screen.
Item
Variable
range
Remarks
S. GAIN VALUE 18dB
24dB
30dB
36dB
VF
display
USER
ENG For selecting the gain
when the SUPER GAIN
switch is pressed.
FRAME MODE screen
The frame rate is set on this screen.
Item
Variable
range
Remarks
FRAME RATE
RANGE 60-12
60-4
VF
display
USER
ENG For selecting the variable
range of the frame rate.
60-12:
60 frame/s (59.94 Hz) to
12 frame/s (11.99 Hz)
60-4:
60 frame/s (59.94 Hz) to
4 frame/s (3.99 Hz)
FRAME RATE 60
:
24
:
4
USER
ENG For setting the frame rate.
<Note>
When “60-12” has been
selected as the FRAME
RATE RANGE setting, the
frame rate cannot be set to
11 frames/sec. or below.
SCAN REVERSE ON
OFF
USER
ENG This function is for
correcting the images when
the prime lens is used.
ON: The images are
corrected (by reversing
their top and bottom and
their left and right).
OFF:The images are not
corrected.