Planet Technology ADSL Firewall Router ADE-4120 - Manual (Page 18)

PLANET ADE-4120 ADSL Firewall Router
14
6. Click OK to finish the configuration.
3.4 Factory Default Settings
Before configurating this ADE-4120, you need to know the following default settings.
1. Web Configurator
Does not require user name and password
2. Device IP Network settings in LAN site
IP Address : 192.168.1.254
Subnet Mask : 255.255.255.0
3. ISP setting in WAN side
Bridge (RFC1483 bridge)
4. DHCP server
DHCP server is enabled.
Start IP Address : 192.168.1.1
End IP Address : 192.168.1.100
3.4.1 Username and Password
The web interface does not require username and password by default. You can select
“Basic” -> “User Profile” to enable the administrator authentication.
If you ever forget the password to log in, you may press the RESET button for
more than 5 seconds to restore the factory default settings..
3.4.2 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values