Preventing the speakers from falling, 7simple se tu p – Panasonic SC-HT995W User Manual

Page 7

Advertising
background image

RQ

T

8

7

6

6

7

Simple

Se

tu

p

[HT995W]

[Note]

≥ The front and surround speakers are different.

– Check the label on the rear of speaker before attaching the stand (

➜ page 9).

– The stand with shorter cable is for the front speaker.

1

Attach the stand to the base.

1 Thread the speaker cable through the base.

For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the hole, and then pull
the rest of the cable through the base.

2 Attach the stand to the base while gently pulling on the

end of the speaker cable.

2

Secure the stand to the base.

3

Attach the speaker to the stand.

1 Pull out the end of

the speaker cable
and position it
between the ridges.

2 Attach the speaker to the stand.

4

Secure the speaker to the stand.

5

Connect the speaker cable.

Preventing the speakers from falling

≥ You will need to obtain the appropriate screw eyes to match the

walls or pillars to which they are going to be fastened.

≥ Consult a qualified housing contractor concerning the

appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.

2 Front speakers and
2 Surround speakers
(with cover plate)

4 Bases

4 Stands
≥ 2kstands with short cable:

For front speakers

≥ 2kstands with long cable:

For surround speakers

16 Screws

Base

Cable

Stand

Base

Cable
Pull gently.

Screw
Tighten securely.

Slide the speaker
cable into the groove.

Stand

Base

Screws
Tighten securely.

Cable

Ridges

Stand

Speaker

Stand

Cover plate
Remove before attaching
the speaker and keep for
wall-mount use (

➜ page 8).

Speaker

Stand

Screw
Tighten securely.
Ensure the speaker cable is
centered in the groove.

_

: White

`

: Blue

Push!

Press the speaker cable
into the groove.

Insert the wire fully.

String (not included)
Thread from the wall to the speaker and tie tightly.

Rear of the speaker

Wall

Approx.
150 mm

e.g.

[HT995]

Screw eye
(not included)

As

sem

b

ling

the

fr

ont

and

surr

ound

spe

ake

rs

HT995 & HT995W.book Page 7 Monday, April 24, 2006 6:08 AM

Advertising
This manual is related to the following products: