Porter-Cable 360 User Manual

Page 4

Advertising
background image

4

2.

Use proper safety equipment. Wear safety goggles to protect your

eyes, wear hearing protection to protect your ears, and wear a
protective mask to minimize breathing in the fine dust created while
sanding.
3.

Sanding of lead-based paint is not recommended. Lead-based paint

should only be removed by a professional.
4.

Always maintain a firm grip on the belt sander handles with both

hands to prevent loss of control.
5.

Do not operate belt sander without all guards and covers securely in

place.
6.

Some wood contains preservatives which can be toxic. Take extra

care to prevent inhalation and skin contact when working with these
materials. Request, and follow, any safety information available from your
material supplier.
7.

WARNING: There are certain applications for which this tool was

designed. Porter-Cable strongly recommends that this tool NOT be modified
and/or used for any application other than for which it was designed. If you
have any questions relative to its application DO NOT use the tool until you
have written Porter-Cable and we have advised you.

Technical Service Manager
Porter-Cable Corporation
4825 Highway 45 North
Jackson, TN 38305

SYMBOL

DEFINITION

V

........................ volts

A

........................ amperes

Hz

........................ hertz

W

........................ watts

kW

........................ kilowatts

µF

........................ microfarads

l

........................ liters

kg

........................ kilograms

N/cm

2

........................ newtons per square centimeter

Pa

........................ pascals

h

........................ hours

min

........................ minutes

s

........................ seconds

........................ alternating current

3

........................ three-phase alternating current

3

N

........................ three-phase alternating current with neutral

........................ direct current

n

0

........................ no load

........................ alternating or direct current

........................ Class II Construction

........................ splash-proof construction

........................ watertight construction

…/min

........................ revolutions or reciprocation per minute

899713 - 04-12-02.qxd 9/23/02 1:49 PM Page 4

Advertising