Panasonic TC 20LB30 - Manual (Page 21)

21
AUDIO ADJUST
2
3
Press to select AUDIO ADJUST.
Press to display the AUDIO ADJUST
screen.
Press to select the sub-menu.
Select the setting listening to the
sound.
Press to activate the setting if
necessary.
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
OFF ON
OFF ON
AUDIO ADJUST
NORMAL
MODE
BASS
TREBLE
BALANCE
SURROUND
EQUALIZER
STEREO SAP MONO
AUTO
+ 5
+ 3
0
MODE
MODE
STEREO
SAP
MONO
Function
Two channel audio reception.
Second Audio Programming
(typically used for bilingual audio).
Select when stereo signal is weak.
Note:
• Red display
: With signal
White display : No signal
White display (All modes) : MONO
• To change the mode using SAP button
(see page 10).
STEREO/SAP/MONO
BASS, TREBLE, BALANCE, SURROUND, EQUALIZER
You can change the level of each sub-menu (BASS, TREBLE, BALANCE, SURROUND and EQUALIZER)
for each MODE (AUTO, STANDARD, DYNAMIC and MUSIC) according to your personal preference.
Menu Operations
Sub-menu
BASS
TREBLE
BALANCE
SURROUND
EQUALIZER
Function
Adjusts low frequencies.
Adjusts high frequencies.
Adjusts left and right volume.
To enjoy a concert hall effect, select ON when stereo is playing.
Makes voice sound clear. Normally set to ON.
NORMAL/NORMALIZE
Select “NORMALIZE” and press “OK” button to return each MODE to the factory default setting.
Notes:
• “NORMAL” means the MODE is in the factory default setting. “NORMAL” changes to “NORMALIZE” when
you change the setting of BASS, TREBLE, BALANCE, SURROUND or EQUALIZER.
• You can normalize each MODE separately.
MODE
DYNAMIC
MUSIC
AUTO
STANDARD
Function
Gives contrast to sound.
For programs consisting mainly of music. Enhances high sounds (around 4 kHz).
Automatically adjusts for a wide Dynamic Range.
Emits the original sound.
1
Press the MENU button to display the MENU screen and select ADJUST.