Printek 8000 - Manual (Page 94)

M A I N T E N A N C E A N D T R O U B L E S H O O T I N G
88
Solution
I/O Overflow Make sure handshaking parameters set in
the printer and at the host computer match
each other.
Make sure interface cables are wired
correctly.
I/O Parity Error Make sure parity setting in the printer and
at the host computer match each other.
I/O Error Make sure any optional interface is
installed properly.
PREVENTIVE MAINTENANCE
Very little preventive maintenance is required by your FormsMaster 8000
series printer. It is only suggested that you periodically clear out any
excessive paper dust.
Also, the various bearings used in the FormsMaster 8000 should not
require any lubrication. If you do choose to lubricate any bearings, use only
a 30 Wt. non-detergent motor oil. DO NOT use any grease or any
vegetable based oils.
OBTAINING SERVICE
If your FormsMaster 8000 series printer should require service, please
contact the company where you purchased the printer. If you do not know
where the printer was purchased, please call 800-368-4636 to obtain the
name and number of your nearest Printek Authorized Service Center or to
arrange for factory service.