Panasonic SC-HT15 - Manual (Page 7)

7
RQT7
94
9
Speak
er setup
Step 1
7.5 -9.4 mm
SC-HT16 SC-HT15
3.0-4.0 mm
180 mm
(7-1/16”) 174 mm
(6-7/8”)
Screw
(not included)
Attaching to a wall
Wall or pillar
30 - 35 mm
(1-3/16” - 1-3/8”)
7 - 9 mm (9/32” - 11/32”)
Surround speakers
(19/64” - 3/8”)
(1/8” - 5/32”)
2
SC-HT17
SC-HT16 SC-HT15
CENTER
FRONT (R)
FRONT (L)
SURROUND
(L)
2 1 4 3 5
SURROUND
(R)
4
3
1
5
2
6 Ω
FRONT
4 Ω
CENTER
4 Ω
SURROUND
R L R L
Connect the speaker cables to the subwoofer.
Subwoofer
Copper
Silver Note
Never short-circuit positive (+)
and negative (–) speaker wires.
Copper
Silver
Other speaker setup options
• The wall or pillar on which the speakers are to be attached should be capable of
supporting 10 kg (22 lb.) per screw. Consult a qualified building contractor when
attaching the speakers to wall. Improper attachment may result in damage to the wall
and speakers.
• When mounting the speakers to walls, use a string (not included) to prevent them
from falling ( è page 6).
• (SC-HT17: front and surround speakers, SC-HT16 and SC-HT15: front speakers)
Use of optional speaker cables are recommended when mounting. (You can also
remove the speaker cables from the pipes supplied with this system.)
Fitting optional speaker stands
SC-HT16 SC-HT15
60 mm
(2-23/64”)
Plate thickness +7 to 10 mm
(9/32” - 25/64”)
Speaker
stands (not
included)
Surround speakers
• Observe the diameter and length of the
screws and the distance between screws
as shown in the diagram.
• The stands must be able to support over
10 kg (22 lb.).
• The stands must be stable even if the
speakers are in a high position.
5 mm, Pitch 0.8 mm
SC-HT17PP-EN.fm Page 7 Thursday, March 17, 2005 9:56 AM