Perle Systems C-100-XXXXX - Manual (Page 11)

Fast Ethernet Media Converter – Installation Guide
11
Installing the Simplex Fiber Cable
•
Locate a 100Base-X compliant simplex (1 strand) fiber cable
with appropriate connectors.
•
Connect the fiber cable from one Media Converter Module to
another Media Converter/switch/fiber device.
Installing the Copper Cable
•
Locate 100Base-TX compliant copper cables with male, RJ-
45 connectors installed at both ends.
•
Connect the RJ-45 cable between the Perle Media
Converter Module and the device.
Note: The Perle Media Converter Module supports Auto-MDIX,
therefore a straight-through or cross over Ethernet cable may be
used.