1 connect, 2 install, Insert batteries – Philips QSG XL340 User Manual

Page 3: Charge handset for 24 hours, Connect, Install, Enjoy, What’s in the box

Advertising
background image

What’s in the box

Handset

Base station

Power adaptor for
base

Line cord*

2 Ni-MH recharge-

able AAA batteries

750 mAh

Belt clip

1

Connect

Connect the base station

Insert the plug of the power
cord into the socket on the
bottom of the base station.

Insert the plug of the line
cord into the socket on the
bottom of the base station.

Plug the power supply unit
into your power outlet.

Plug the line cord into the
line socket.

2

Install

Always use rechargeable batteries.

Insert batteries

Quick start guide

Battery door

*You may find in the box the line adaptor

delivered separately from the line cord. In
this case, please plug first this line adapter
onto the line cord before connecting it to

the line socket.

Make sure you have all these items in the box. For missing item(s), contact your
dealer.
In multi-handset packs, you will find additional handsets, chargers, power supplies,
and batteries.

Warning :

Always use the cables and batteries provided in the box.

Charge handset for
24 hours

3

Enjoy

Make a call

Press

and dial the number.

TIP :You can predial the number before seizing the line.

During a call, press

to turn on and off the handset loudspeaker.

Answer a call

Press .

Adjust the audio volume while on line

Press or to

increase

or

decrease the audio volume.

Set the handset ring melody in standby mode

1. Press and hold

until you see the current melody name.

2. Select the desired melody by pressing digit keys 0 to 9.

3. Press to

confirm.

Save a name and a number in a direct access memory

1. Enter the number in standby mode.

2. Press and hold one of the direct memory keys

or

or .

3. Enter the name.
4. Press and hold the same memory key to save the name.

User manual

If the batteries are completely

exhausted, the handset will
not be able to power-on
immediately. Handset may get
warm during initial charge.

This is normal.

Change the ringing volume in standby mode

1. Press and hold

until you see the current melody name.

2. Press

or

to increase or decrease the volume level.

3. Press to

confirm.

If the ringing volume level is set to OFF,

appears.

Guarantee

A

A

B

OR

!

Place the two rechargeable
batteries (included) into the
battery compartment.

Slide the battery door firmly
into place.

Only use rechargeable

batteries

End a call

Press .

QSG XL340_US-EN.qxd 26.03.2007 19:16 Seite 1

Advertising
This manual is related to the following products: