Palsonic TFTV380 - Manual (Page 15)

SOURCE CH + CH - VOL + MENU VOL -
Turning On/Off
14
Turning On
Turning Off
Selecting input signal
1. Press the AV button on the remote control or SOURCE
button on the control panel to select input mode. You can
select TV, AV, S-video or PC.
2. If you want to go to TV mode, press AV button repeatedly
until TV picture displays. You can also press 0~9 digit
buttons, CH+ or CH- button to go to TV mode.
3. Press OSD button, the screen displays current mode.
Press again to cancel OSD.
Notes:
1. Insert the outlet plug of the AC power adaptor into the
DC power input of the unit.
2. Press the power switch and the red indicator lights up,
the TV/MONITOR is in STANDBY mode.
3. Press the SOURCE button on the unit's control panel
or the button on the remote control, the red indicator
turns yellow and the set is turned on.
In TV mode, when there is no TV signal input for about 15
minutes, the set goes to STANDBY automatically. (The Blue
Background item should be set to Enable).
1. If you want to turn off the power completely, press the
power switch.
2. If you want to turn off temporarily, press the button on
the remote control, the set goes to STANDBY and the
indicator turns red.
Notes:
This TV set can automatically turn off by:
1. When there is no TV signal input for about 15 minutes;
2. Sleep timer;
3. Off timer.