Panasonic DVD-F87 - Manual (Page 13)

R
Q
T
7292
13
∫ “Display” tab
∫ “Others” tab
§ 1 Language options
[U.S.A.\and\Canada] : French and Spanish
[Asia] : Chinese
\Australia\and\N.Z.] :
French, German, Italian, Spanish, Portuguese, Swedish and Dutch
§ 2 The original language designed on the disc is selected.
§ 3 Input a code number referring to the table on page 15.
§ 4 If the language selected for “Audio” is not available, subtitle appear in
that language (If available on the disc).
§ 5 [U.S.A.[and\Canada[
§ 6 [Asia]
§ 7 \Australia\and\N.Z.]
[DVD-F87]only]
When you connect with AUDIO OUT 5.1 ch ( ➜ page 4) and select “Multi-channel”( ➜ page 12, “Speaker Setting” in “Audio” tab)
Icon examples:
Surround speaker (LS)
≥ Large: Select when the
speaker supports low-frequency (under 100 Hz) reproduction.
≥ Small: Select when the speaker does not support low-frequency
reproduction.
If the subwoofer is set to “No”, the front speakers will automatically be set
to “Large”.
(Effective when playing multi-channel audio)
If either distance d or f is less than e , find the difference in the relevant
table and change to the recommended setting.
1. Select “Test” and press [ENTER].
A test signal is output.
Front (L) _—) Center _—) Front (R)
: ;
Surround (LS) (—————= Surround (RS)
2. While listening to the test signal, press [ 3 4 ] to adjust the
volume of the center and surround speakers so they are the
same apparent volume as the front speakers (
s 6 to r 6).
(The front speakers cannot be adjusted here.)
3. Press [ENTER].
The test signal stops.
≥ No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
To finish the speaker setting
Press [
3 4 2 1 ] to select “Exit” and press [ENTER].
Menu Language § 5 ≥ English ≥ Français ≥ Español
§ 6 ≥ English ≥
§ 7 ≥ English ≥ Français ≥ Deutsch ≥ Italiano ≥ Español ≥ Português ≥ Svenska ≥ Nederlands
On-Screen Messages ≥ On ≥ Off
FL Dimmer
Changes the brightness of the unit’s display. ≥ Bright ≥ Dim
≥ Auto:The display is dimmed during play, but brightens when you perform some operations.
Auto Power Off ≥ On: The unit switches to standby mode after about 30 minutes in the stop mode, irrespective of the SLEEP setting.
≥ Off
HighMAT ≥ Enable ≥ Disable (Unable to use the HighMAT function.)
QUICK SETUP ≥ Yes ≥ No
Re-initialize Setting
This returns all values in the Setup menus to
the default settings. ≥ Yes: The password screen is shown if “Ratings” ( ➜ page 12) are set. Please enter the same
password. After “INIT” on the display disappears, turn the unit off and on again.
≥ No
Changing the speaker setting to suit your speakers
Speaker presence and size ( a )
m s
m s
d B
0
d B d B
L
Exit
Test
LS
R
SW
C
RS
d B
0
0 0.0 0
0.0
b a c a a
c a
(LS) (RS)
a c b c a
Exit
Test
signal
Front (L) Center Front (R)
— Surround — Subwoofer
LS LS
No Large Small
Delay time ( b )
d Center speaker
Difference Setting
Approx. 34 cm (1 1 ⁄
10
feet) 1.0 ms
Approx. 68 cm (2 1 ⁄
5 feet) 2.0 ms
Approx. 102 cm (3 3 ⁄
10 feet) 3.0 ms
Approx. 136 cm (4 2 ⁄
5 feet) 4.0 ms
Approx. 170 cm (5 1 ⁄
2 feet) 5.0 ms
f Surround speakers
Difference Setting
Approx. 170 cm (5 1 ⁄
2 feet) 5.0 ms
Approx. 340 cm (11 feet) 10.0 ms
Approx. 510 cm (16 1 ⁄
2 feet) 15.0 ms
Channel balance ( c )
LS RS
L R
SW
f
e
d
C
: Recommended placement
Changi
ng t
he
pla
y
er
set
ti
ngs
7292En.fm 13 ページ ２００３年１２月２４日 水曜日 午前９時３６分