Powercom 400 User Manual

Page 12

Advertising
background image

12

Frequency
(on battery)

50 or 60 Hz +/-2%

Transfer Time

2/4 milliseconds, including detection time

Spike Protection

320 joules, 2ms

Overload Protection

UPS automatic shutdown if overload exceeds 110% of
nominal at 60 seconds and 130% at 3 seconds.

Unit Input

Fuse for overload & short circuit protection

PROTECTION
and FILTERING

Short Circuit

UPS output cut off immediately or input fuse protection

Type

Sealed, maintenance-free lead acid

Typical Recharge Time 4 hours ( to 90% of full capacity)

BATTERY

Back up Time

3-30 minutes (depending on computer load)

Net Weight kg (lbs)

5.0 (11)

5.5 (12)

6.0 (13)

Shipping Weight kg
(lbs)

5.5 (12)

6.0 (13)

6.5 (14)

Dimension (mm)
WxDxH

97 x 260 x 135

PHYSICAL

Input Inlet

IEC 320 power inlet

Line normal

Steady ON of green LED

Battery in use

Slow blinking of green LED (about 0.47Hz)

Battery low

Fast blinking of green LED (about 1.825 Hz)

INDICATOR

Over low

Very rapid blinking of green LED (about 3.75 Hz)
between 110% to 130% load.

Battery in use

Slow beeping sound (about 0.74 Hz ) 1 minute

Battery low

Medium beeping sound (about 1.825Hz)

ALARM

Over load

Rapid beeping sound (about 3.75 Hz) within 110%
to130% load.

Safety

cUL, TUV, CE, meet FCC

CONFORMANCE

Surge

Meet IEEE 587 standard

Ambient operation

3,500 meters max. elevation, 0-95% humidity non-
condensing 0-48 deg C

Audible noise

<40 dBA (1 meter from surface )

ENVIRONMENT

Storage condition

15000 meters max. elevation

©1999 Powercom Co., Ltd. All right Reserved. All trademarks are property of their respective owners.

Specifications subject to change without notice.



Advertising
This manual is related to the following products: