Panasonic EB-GD96 - Manual (Page 30)

Voice Dial Entry Setup
This function allows you to recall and dial numbers from your
Phonebook using voice commands.
1 From Idle mode press Q, select Personalise > Voice
Command > Voice Dial and press Q
2 Press Q to add a new Voice Dial entry to the list
3 Browse through the Phonebook to select an entry which you
wish to attribute a voice command to, and press Q twice
Note: Each recording is short in length, so be prepared to speak
once you have initiated the recording.
4 When ready, hold the phone approximately 7” (178mm) from
your mouth, press Q and speak clearly into the microphone
to record the name of the selected Phonebook entry
When the recording has stopped, you will be prompted to repeat the
name.
5 Press Q and repeat the name
Once recording is complete for a second time, the display will
indicate if the recording was successful or not. If unsuccessful,
repeat from step 4.
Recalling Voice Dial Entries
From Idle mode move and hold the navigation key (g) in any
one of the four directions a, b, c or d. Speak clearly the
name you wish to recall (exactly as recorded) and wait
The above procedure will recall the phone number and the recorded
Voice Dial entry is repeated; to initiate the call press D.
Dialling Voice Dial Entries
Using Permission
From Idle mode press Q, select Personalise > Voice
Command > Permission and press Q
With this function enabled a recalled phone number is automatically
dialled without further intervention.
Repeat this process to disable the Permission function returning to
Voice Dial recall only
22
Personalising Your Phone