Polaroid ColorShot Printer - Manual (Page 61)

Removing an empty
pack
The screen displays an “out of film”
message when the pack is empty.
1 Press the door latch and pull open
the tray.
2 Remove the empty pack and reload a
fresh pack as described in Load the
film on page 8.
Handling the print
The print is dry as soon as it is ejected
and can be handled immediately;
however, for the first few minutes, do
not shake or bend the print. Handle it
gently, by the wide white border only.
Allow several minutes for the print to
develop fully saturated colors.
22
PRINTING (CONT.)