Port-A-Cool unit series 2000 Pneumatic PAC2K36AD User Manual
Page 4
Compressed Air Connection
WARNING: use extreme caution when connecting or disconnecting
compressed air!!
Before connecting compressed air to the PORT-A-COOL® unit be sure that both the Jet
Fan or Air Mover and the Pump shut-off valves are closed. The air is connected by way of
a Crow’s foot type bayonet connector. This connection is made by placing the matting
together where the rubber seals are touching and then twisting the input hose connector
90 deg. clockwise while pressing the two fittings together. A pin should then be inserted
into the two holes to provide a secure and safe attachment.
AIR DRIVE CONSUMPTION RATES
2
INLET
FLOW
AIR
PRESSURE
RATE
FLOW
MODEL#
PAC2K36AD
80 PSI
l96 scfm
9,100 cfm
PAC2K24AD
40 PSI
164 scfm
4,898 cfm
PAC2K16AD
40 PSI
83 scfm
2,200 cfm