Primera Technology Network Disc Duplication & Printing System - Manual (Page 16)

12 Sending Jobs to the XRn
4. Select the print label file by clicking the select a
label button. When you have selected print label
file, click the next arrow. There are several ways to
select a print file. See the explainations below for
more information.
For any job type you choose you will be prompted to select
a label file to print. You may select an existing label, create
a label or choose to print nothing. Simply click the next
arrow to print nothing on the disc. Otherwise follow the
steps below.
4A. Select a Label
4A1 - Click the Select a Label button to open a browse
window to choose your print file. Use the Favorites,
Browse or Find Tabs on the bottom of the left pane to find
the print file or click the Look In drop down to find the
file.
4A2 - Double Click on the file to add it to your project.
You may add any BMP , JPG or SureThing (.std) file.
SureThing files are automatically formated correctly. BMP
or JPG files should be 4.72" x 4.72" square. For best print
quality the image resolution should be atleast 300 dpi.
Use the tabs on the top left to browse in explorer mode or
search for files. Below is a description of each of the search
types.
510991.qxd 6/15/2007 10:07 AM Page 12
TOC INDEX