Panasonic DP-2500 - Manual (Page 32)

32
CONTRAST LCD
REDIAL / PAUSE
LINE SELECT
FLASH/ SUB-ADDR
SET
ORIGINAL COPY SIZE SIZE
LEDGER
LEGAL
INVOICE
LETTER
LETTER
MONITOR
RESET
START
1 2 3
4 5 6
7 8 9
0
PQRS
GHI
TUV
JKL
ABC
WXYZ
MNO
DEF
STOP
ON LINE
ON LINE
DATA
FAX
INTERNET
PRINTER
MULTI-SIZE FEED SORT
ALARM ACTIVE
CLEAR
ENERGY SAVER
DP-3000
INTERRUPT FUNCTION
TONE TONE
COPY
ADD TONER
MON. VOL.
Energy Saver/Interrupt
NOTE
ENERGY SAVER Key INTERRUPT Key
■ These modes can save power while the copier is
not in use.
Energy Saver Mode
# To enter this mode
Press the ENERGY SAVER key or the copier will
automatically enter the Energy Saver Mode after 15
minutes from the last copy. The indicator will flash.
$ To cancel this mode and make copies
Press the ENERGY SAVER key again.
Sleep Mode *
# Automatically enters the Sleep Mode after 60
minutes from the last copy. The copier power will
drop and the indicator will light.
$ To make copies, press the ENERGY SAVER key.
Interrupt Mode
C This mode can interrupt other copy jobs while
making copies.
# Touch the INTERRUPT key, the indicator will light.
$ Make another copy job using the platen glass.
% Touch the INTERRUPT key again to continue the
original job.
Note: The ADF/iADF can not be used with interrupt.
(Use only the Platen)
C Energy saver time (15 minutes) and Sleep time (60 minutes) can be changed by the
key operator. (See page 39)
Other Features
Modes Power Consumption Warm Up Time
Normal Operation
Energy Saver Mode
Sleep Mode
Approximately149 Wh
Approximately 49 Wh
Approximately 1.8 Wh (DP-2500)
Approximately 1.9 Wh (DP-3000)
N/A
30 sec. recovery
35 sec. recovery (DP-2500)
45 sec. recovery (DP-3000)
∗
Sleep Mode will not activate if the file for the Overlay mode has been stored in
memory. (See page 30)
ENERGY SAVER
INTERRUPT