Philips CD485 - Manual (Page 15)

15 EN
Call from the call log
You can return a call from the outgoing,
received or missed call log.
Tip
• For more information, see “Return a call” in the
Call log section.
Note
• The call timer displays the talk time of your
current call.
Note
• If you hear warning tones, the handset is almost
out of battery or the handset is out of range.
Charge the battery or move the handset nearer
to the base station.
End a call
You can end a call in these ways:
• Press ; or
• Place the handset to the base station
or charging cradle.
Answer a call
When the phone rings, you can:
• press / to answer the call.
• select [Divert] to send incoming call to
the answering machine.
• select [Silent] to turn off the ringer of the
current incoming call.
Warning
• When the handset rings or when the handsfree
is activated, keep the handset away from your
ear to avoid ear damage.
Note
• The caller ID service is available if you have
registered to the caller ID service with your
service provider.
Tip
• When there is a missed call, the handset displays
a notification message.
Adjust the earpiece volume
Press 3 or 4 to adjust the volume during a call.
» The earpiece volume is adjusted and
the phone is back to the call screen.
Mute the microphone
1
Press during a call.
» The handset displays [Mute on].
» The caller cannot hear you, but you
can still hear his voice.
2
Press again to unmute the microphone.
» You can now communicate with the
caller.
Tip
• Press 1 to activate/deactivate background noise
at your earpiece during a call.
English