Number of rings – Panasonic KX-TS620W User Manual
Page 19
19
Preparing the Answering System
For assistance, please visit http://www.panasonic.com/phonehelp
Number of Rings
You can select the number of times the
unit rings before the answering system
answers a call, from “2” to “7” or “Toll
saver*”. Your phone default setting is
“4”.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
Press {FUNCTION/EDIT}.
2
Scroll to “Set answering ?”
by pressing {
4
}
or {
3
}
, then
press {OK} (Yes key).
3
Scroll to “Number of rings?”
by pressing {
4
}
or {
3
}
.
4
Press {OK} (Yes key).
• The current setting is displayed.
5
Select the number of rings by
pressing {
4
}
or {
3
}
.
• You can also select the number of
rings by pressing dialing buttons
{
2} to {7} or {0} (Toll saver*).
6
Press {OK} (Save key).
• A long beep sounds.
• The display will return to step 3. To
exit the programming mode, press
{
EXIT} or wait for 60 seconds.
• You can exit the programming mode any
time by pressing {EXIT}.
Number of rings
:4
[OK]=Save
* Toll Saver
When you call the unit from a touch
tone telephone:
If the unit answers on the 2nd ring,
there is at least one new message.
If the unit answers on the 4th ring,
there are no new messages.
Hang up when you hear the 3rd
ring. This will save you the toll charge
for the call.
TS620bk01.book Page 19 Wednesday, May 24, 2006 2:31 PM