Panasonic KX-TS620W - Manual (Page 9)

9 For assistance, please visit http://www.panasonic.com/phonehelp
Connecting the Handset /AC Adaptor/ Telephone Line
Cord
After line connection, lift the handset to check for a dial tone.
• USE ONLY WITH Panasonic AC ADAPTOR PQLV205 or PQLV207.
• Use only a Panasonic Handset for the KX-TS620W or KX-TS620B.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet as the weight of the adaptor
may cause it to become disconnected.
• If your unit is connected to a PBX which does not support Caller ID services, you cannot
access those services.
Hook
Telephone
Line Cord
To Power Outlet
(AC 120 V, 60 Hz)
Handset
Handset Cord
To Single-Line
Telephone Jack (RJ11C)
AC Adaptor
Fasten the AC
adaptor cord
to prevent it
from being
disconnected.
LINE
Settings
TS620bk01.book Page 9 Wednesday, May 24, 2006 2:31 PM