Panasonic AG-HPX250EN - Manual (Page 139)

139
Menu
SW MODE screen (continued)
Item Setting Notes
USER MAIN Sets the function assigned to the USER MAIN button.
SPOTLIGHT, BACKLIGHT, ATW, ATWLOCK, S.GAIN,
D.ZOOM, Y GET, DRS, TEXT MEMO, SLOT SEL,
SHOT MARK, MAG A. LVL, LVL METER, PRE REC,
WFM, LAST CLIP, FBC, LCD B.L
“Using the USER buttons” (Page 39)
USER1 Sets a function assigned to the USER1 button.
The functions that can be assigned to this button are the
same as for the USER MAIN button.
BACKLIGHT (factory default setting)
“Using the USER buttons” (Page 39)
USER2 Sets a function assigned to the USER2 button.
The functions that can be assigned to this button are the
same as for the USER MAIN button.
TEXT MEMO (factory default setting)
“Using the USER buttons” (Page 39)
USER3 Sets a function assigned to the USER3 button.
The functions that can be assigned to this button are the
same as for the USER MAIN button.
DRS (factory default setting)
“Using the USER buttons” (Page 39)
USER4 Sets a function assigned to the USER4 button.
The functions that can be assigned to this button are the
same as for the USER MAIN button.
SLOT SEL
“Using the USER buttons” (Page 39)
MF ASSIST Automatically sets the last focus during manual focusing.
ON:
Automatically sets the last focus.
• The focus may not be set correctly if the last focus
differs considerably from the manually set focus.
• You cannot operate using the remote control connected
to the CAM REMOTE jack.
OFF:
The focus is not adjusted automatically.
WFM Selects the waveform displayed in the LCD monitor when
the user button to which WFM has been assigned is
pressed.
WAVE:
Displays a waveform.
VECTOR:
Vectorscope display
WAVE/VECT:
Each press of the button, switches the settings in the
following order:
OFF → WAVE (waveform) → VECTOR → OFF
___indicates the factory setting.