Promise Technology FastTrak SX4000 Lite - Manual (Page 3)

Quick Start Guide
3
Step 1: Unpack Your FastTrak Card
When you receive the FastTrak SX4000 Lite, the package should contain the
items listed below:
• FastTrak SX4000 Lite Controller Card
• Quick Start Guide
• FastTrak SX4000 Lite driver diskette
• Four Internal 18 inch (46 cm) Ultra ATA, 80-wire/40-pin hard drive
cables
• Two Y-cable power splitters
• CD with Drivers, Promise Array Management (PAM) utility, PAM User
Manual and FastTrak S150 SX4 / SX4000 / SX4000 Lite User Manual
If any of the items are missing or appear damaged, please contact your dealer
or distributor immediately.
Note
The Promise card is a PCI Plug-n-Play (PnP) device. No
changes are necessary in the motherboard CMOS/BIOS Setup
for resources or drive types in most applications.
Warning
Before installing the adapter into an existing system, backup any
important or useful data. Failure to follow this accepted PC
practice could result in data loss.
Warning
The FastTrak card, like other parts of your system, is subject to
damage by static electricity. Be sure that you’re properly
grounded (Promise Technology recommends that you wear an
anti-static strap or touch a grounded object) and that you unplug
your system before installing FastTrak.